Cetus® DE

Cetus® DE

Cetus®DE is a premium performance, synthetic compressor oil based on diester technology and containing an ashless inhibitor system, providing protection against corrosion and outstanding oxidation resistance under severe operating condition

typical characteristics

recommended uses

Cetus DE oils are used for portable and stationary rotary screw, rotary vane, and reciprocating compressors. While specific manufacturer recommendations vary, the ISO 68 grade is most commonly used for rotary compressors, while higher viscosity grade is preferred for reciprocating units. Also suited for the lubrication of anti-friction bearing assemblies operating under high temperature conditions (e.g. in fans, blowers and process pumps). Not recommended for use in breathing air compressors. These oils can be used in compressors with the following gases: process air, benzene, butadiene, carbon dioxide (dry), carbon monoxide, ethylene, furnace (crack) gas, helium, hydrocarbon gases, hydrogen, inert gases, methane, natural gas, nitrogen, propane, sulfur hexafluoride, and synthesis gas. Note that this information is intended for general guidance only. The satisfactory lubrication of gas compressors with Cetus DE is dependant on numerous factors. Advice should be sought from the equipment manufacturer in specific circumstances. Cetus DE oils can be used in contact with the following seals, paints, and plastics: Viton®, High nitrile Buna N®, Teflon®, Epoxy paint, Oil-resistant alkyd, Nylon, Delrin®, Celcon®. These oils should not be used with: Neoprene, SBR rubber, Low nitrile Buna N®, Acrylic paint, Lacquer, Polystyrene, PVC, ABS.

performance benefits

Extended service life

Outstanding oxidation stability of the diester base fluid and inhibitor system resists oil breakdown at the elevated temperatures encountered in compressor service, permitting oil drain intervals to be extended beyond those achieved with conventional lubricants. Low sludge forming tendency and a high solvency for deposits that help to keep compressor parts clean even under severe service conditions

Protection at high and low temperatures

Diester base fluid ensures an effective oil film to protect loaded parts against wear under both high temperature operating conditions and during low temperature start-up. Higher flash points, fire points, and auto ignition temperatures provide greater margin of safety as compared to conventional mineral oil products. The inhibitor system provides good rust and corrosion protection.

VIET DUC JOINT STOCK COMPANY

Address: No. 274 Ngo Quyen, Van My Ward, Ngo Quyen District, City. Hai Phong


Customers who need technical advice, large quantity purchases, or register to be distributors of products, please contact:

Hotline /Zalo : 0904.085.608 - Ms. Mai (Head of Sales)