Shell Omala S2 GX is a high quality extreme pressure (EP) oil mainly used to lubricate heavy duty industrial gearboxes. The combination of high load carrying capacity, anti-micro-pitting protection, seal & paint compatibility provides excellent performance in industrial sealed gearboxes.
Features & benefits
Long oil life due to oxidation stability and thermal stress resistance – Leading to reduced overall cost of ownership
Shell Omala S2 GX is formulated to reduce the risk of thermal & chemical decomposition throughout the working life.
The oil resists high thermal loads and sludge formation, even at tank temperatures up to 100°C.
Excellent resistance to abrasion and micro-pitting
Shell Omala S2 GX is formulated to provide excellent load carrying capacity and anti-micro-pitting properties, helping to prolong equipment life.
Maintains gear system efficiency through optimized water separation, corrosion control and foaming
Shell Omala S2 GX represents a combination of excellent water separation, corrosion protection and low foaming tendency.
Water will promote fatigue on gear and bearing surfaces, as well as cause corrosion of iron on internal surfaces.
The oil has high anti-corrosion protection, even when contaminated with seawater and solid deposits.
The oil is formulated to minimize the tendency for foaming, which commonly occurs in applications where the oil retention time in the tank is short.
High shear stability, maintaining viscosity stability throughout the maintenance period
High system performance is also thanks to compatibility with common gaskets, sealants, and adhesives to help avoid oil leaks.
Shell Omala S2 GX is compatible with common surface paints.
Main applications
Closed industrial gear systems
Shell Omala S2 GX technology uses an effective extreme-pressure (EP) additive system specifically designed for industrial sealed gearboxes using steel spur/helical/planetary gears, including heavy-duty systems with splash or forced-pump lubrication.
Shell Omala S2 GX is also suitable for non-gear applications, including bearings and steel parts lubricated by splash or forced pumping.
Other applications
Shell offers a range of products for every gear application with different requirements:
Shell Omala S4 GXV: Recommended for systems that specify synthetic oils, require extremely long oil life or environments with large temperature variations.
Shell Omala S4 WE, Shell Morlina S4 B and Shell Omala S1 W: Recommended for worm drives.
For automotive gear applications, suitable Shell Spirax oils should be used.
For gear systems fitted with a fine oil filter (<5 microns), please contact your Technical Support Specialist and Shell Product Application Specialist (PAS) before using Shell Omala S2 GX.
Technical Standards, Approvals & Recommendations
Shell Omala S2 GX 150 meets the requirements of:
ISO 12925-1 Type CKD (ISO 150)
ISO 12925-1 Type CKC (ISO 150)
DIN 51517- Part 3 CLP (ISO 150)
AGMA EP 9005-F16 (ISO 150)
AIST (US Steel) 224 (ISO 150)
Fives Cincinnati: P-77 (ISO 150)
Approved or recommended by
Siemens AG: Shell Omala S2 GX 150 is approved by Siemens AG for use in Flender helical/bevel/planetary and Marine gear sets.
For a complete list of equipment approvals and recommendations, please contact Shell Technical Support.
Typical physical properties
Health, Safety & Environment
Health and Safety
The product does not pose any significant health or safety hazard when used as recommended and industrial & personal hygiene standards are followed.
Avoid skin contact.
Use impermeable gloves with used oil.
If skin contact occurs, wash immediately with soap and water.
For further health and safety guidance (MSDS), refer to the relevant Shell Product Safety Data Sheet from: http://www.epc.shell.com
Environmental protection
Collect used oil to designated collection points.
Do not discharge into sewers, ground or water sources.
Video: Shell Omala S2 GX gear oil – Features and benefits
A simulation of the gear protection features of Shell Omala S2 GX oil. (Source: Lubri-Chem Phils YouTube channel)
VIET DUC JOINT STOCK COMPANY
Address: 274 Ngo Quyen Street, Ngo Quyen Ward, Hai Phong City, Vietnam
For technical consultation, bulk purchases or distributor registration, please contact:
Hotline / Zalo: +84 896 691 189 - Mr. Tony Truong - International Sales